Date: 2021-08-17
Copyright of the European Union is effective (Copyright EU) (c) 2021 GENEREX Systems GmbH, Hamburg, Germany, All rights reserved
TEL +49(40)22692910 - EMAIL generex@generex.de - WEB www.generex.de (This and all other product datasheets are available for download.)
4
Example: How to use Custom Thresholds
RCCMD
What is RCCMD
Configuration of RCCMD
Setting up RCCMD-Jobs
Defining the IP address for RCCMD jobs
How to define the timing for RCCMD
RCCMD Commands
UPS variables for RCCMD Traps
SITEMONITOR 6: specific sensors and devices
Strain relief and cable harness
Removing the terminal strips
Naming contacts
How to use NC (normally close) contacts
The „hold function “
Configuration of a job for alarm behaviour
The SITEMONITOR 6 AUX Ports
Configurating the outputs
SITEMANAGER 6: Sensor setup
Sensors and devices for the SITEMANAGER 6
SITEMANAGER 6 Configuration
Differences SITEMANAGER / SITEMONITOR
Using the direct connectors
Definition of the alarm thresholds
Sensor range, Pre-Alarm and Alarm
Digital Inputs
Extended System Monitoring
SITEMANAGER 6 – Job definition:
Scheduler
How it works
Setting up Scheduled Jobs
Webserver
Safety instructions
HTTP-setup
How to use a server.pem - file
Diagnosis
System status LED’s
Log files
Event log
Datalog
Datalog Chart
Premium function: The UPS alert history
Tools
Reboot
Tracer
Network Scan
Data protection notice for the Network Scan
Data evaluation
Delete data
Change the displayed logo / use your own logo
Backup and Update
Creating a backup file
Restore system configuration from a backup
Running a firmware update
Changing the OEM firmware
Known update problems