Depth Alarm - ON/OFF
To access：From SETTINGS, press the UP or DOWN
buttons until the pointer aligns with SDPTH-ALM.
Press the MODE button once.
One of the two options will be blinking at the
bottom. Press the UP or DOWN buttons to select
turning the Scuba Depth Alarm either ON or OFF.
Press the MODE button once to accept your
selection. If you set the SDPTH-ALM on, when you
reach the preset depth, the alarm will activate.
SDPTH-ALM
S = Scuba
DPTH = Depth
ALM = Alarm.
Dive Time Alarm - On/Off
To access：From SETTINGS, press the UP or DOWN
buttons until the pointer aligns with STIME-ALM.
Press the MODE button once.
One of the options will be blinking at the bottom.
Press the Up or Down buttons to select turning the
Scuba Time Alarm either ON or OFF. Press the
MODE button to accept your selection. If you set
the STIME-ALM on, when you reach the preset
time, the alarm will activate.
STIME-ALM
S = Scuba
TIME = Time
ALM = Alarm.
To Next Page
Loading...