Depth Alarm Setting
To access：From SETTINGS, press the UP or DOWN
buttons until the pointer aligns with SDPTH-MAX.
Press the MODE button once.
One of the depth options will be blinking at the
bottom. Press the Up or Down buttons to select
other options as needed. Press the MODE button
to accept your selection. During a dive, when you
reach the selected depth, the alarm will activate.
SDPTH-MAX
S = Scuba
DPTH = Depth
MAX = Maximum Depth at which the alarm will
activate.
Dive Time Alarm Setting
To access：From SETTINGS, press the UP or DOWN
buttons until the pointer aligns with STIME-MAX.
Press the MODE button once.
One of the time options will be blinking at the
bottom. Press the Up or Down buttons to select
other options as needed. Press the MODE button
to accept your selection. During a dive, when you
reach the selected dive time, the alarm will
activate.
STIME-MAX
S = Scuba
TIME = Time
MAX = Maximum
To Next Page
Loading...