Gauge Mode – Bottom Timer
To access: From SETTINGS, press the UP or DOWN
buttons until the pointer aligns with GAUGE. Press
the MODE button once. Access the Gauge mode and
view the screen information.
GD: Current Depth in Gauge Mode
AVG: Average Depth in the current stage
STPW: Stop Watch - Dive Time in the current stage
TIME: Dive Time
TEMP: Water temperature.
Notes: You may reset the AVG/Average Depth and
and STPW/Stop Watch and Dive Time in the current
stage by pressing the UP Button to reset during the
dive.
The Gauge Mode is only a bottom timer, it will only
indicate the depth/time parameters during a dive. It
will not provide NDL calculations.
To Next Page
Loading...