2. Enter the engineers program as previously
described. Access the Systems Settings
menu and using the ▼ (down) key highlight
Serial Flash. Press the ↵ (Edit) key to
enter the sub program. If an empty card is
being used the LCD will display the screen
as shown.
3. Using the
▼ (down) key highlight
Configuration Data then press the ↵ (Edit)
key to enter the sub program. As the card
is empty of data the LCD will display the
screen as shown.
N.B. When a key with data loaded is used the menu will also include
Image Info, Load Data and Delete Data along with the Save Data menu.
4. To save data to the key press the ↵ (Edit)
key. The Save Data screen will be
displayed with 16 empty data fields
available. Press the ↵ (Edit) key once more
to enter the menu screen as shown. From
this menu the engineer can either enter
the Edit Data Screen and enter a description before saving the data (see
page 47 for details) or scroll down and simply save the data.
5. Press the ↵ (Edit) key to save the data to
the key. The LCD will display the screen
as shown before exiting to standby mode.
Disconnect the machine from the power
supply and open the door. Unplug the data
key and replace the control board cover.
Close the monetary door and the door of the machine before restoring
power to the machine.
Backup/Restore
This menu allows the engineer to manually backup information stored in the
machines memory to the controller board.
N.B. It is also possible for the engineer to programme Backup as a timed
event, thus ensuring even greater security for the information stored in
memory. This ensures that the machine can easily be restored to its last
operational state should the information be lost through corruption or power
failure. See
Backup Events (see page 68) for full details.
Conf igur ation Data
Press E DIT to Select
Save Data
Save Data
Press E DIT to Select
Edit Da ta
Save Data
Save Data
Are you sur e you want
to save t his dat a
to the di sk?
CANCEL - EXIT OK - EDIT
Serial Flash
Firmwa re 0
Default Data 0
Conf igu ration Data 0
Conf igu ration and Sales Data 0
Language Data 0
Technical Manual
59
To Next Page
Loading...
Need help?
General