14. System Configuration and Settings
Installer
Name: ________________________________________________________________________________________
Address: _____________________________________________ City/State:_________________________________
Phone: ____________________________________________ Install Date: _________________________________
Softener System Configuration
Tank Size: Dia. In Height in Resin Volume: cu/ft.
Brine Tank Capacity: 85L 100L 130L
Media: ________________________________________________________________________________________
Control Valve Model: _____________ Serial Number: ______________
DLFC Size: BLFC Size: ________________ Injector: ______
Valve Programming
Regen Cycles: Cycle 1 Cycle 2 Cycle 3
Mode: A-01 Meter Delay A-02 Meter Immediate A-03 Intelligent Meter Delay
A-04 Intelligent Meter Immediate A-05 Remaining Compare A-06 Timer A-07 Filter
Water Conditions and Quality
Total Hardness: grains Iron (Fe): _________ppm Acid (pH): ____________
TDS: ___________ppm Pressure of Inlet Water: PSI
Other: __________________________________________
Water Source: Well Water City Water Other: _________________________________________
Genesis Upflow Valves & Systems Service Manual
To Next Page
Loading...