English
-11-
GETTING STARTED
You can use 2 AA size batteries (Alkaline, Ni-MH) to power the camera.
Installing Batteries
1. Make sure the camera is off.
2. Slide the battery/SD card cover in the direction of the
[OPEN] arrow.
3. Insert the batteries according to the correct polarity
marks (+ or -).
4. Close the battery/SD card cover firmly.
NOTE
y If you will not be using the batteries for an extended period of time, remove them from the
camera to prevent leakage or corrosion.
y Never use manganese batteries.
y Never use batteries of different types (together) or mix old and new batteries.
y Avoid using batteries in extremely cold environments as low temperatures can shorten the
battery life and reduce camera performance.
y When the icon appears on the LCD monitor, the LED indicator will blink for 5 seconds
and then the camera will automatically power off. Replace the exhausted batteries with a new
set of batteries.
To Next Page
Loading...
