English
-13-
2. Pull the large loop through the small loop until the strap is firmly secured
Setting the Date and Time
The Date/Time screen will be presented if/when:
Camera is turned on for the first time.
Camera is turned on after leaving the camera without batteries for an extended period of
time.
When the DATE/TIME screen appears, follow these
steps to set the correct date and time.
Select the year, month, day, and time fields by using
the
/ button.
Press the OK button after all fields are set.
To increase the value, press the button.
To decrease the value, press the
button.
Setting Image Resolution and Quality
Resolution and quality settings determine the pixel size (dimension), image file size, and
compression ratio for your image. These settings affect the number of images that can be stored
in internal memory, or on an SD memory card. As you get to know the camera, it is
recommended that you try each quality and resolution setting to get an appreciation for the
effects that these settings will have on your images.
Higher resolution and higher quality images offer the best photographic results but produce large
files sizes. Therefore, few images will take up a lot of memory space.
High resolution and quality settings are recommended for printed output and situations requiring
the finest detail. Lower resolution/quality images take up less memory space and may be quite
suitable for sharing images via e-mail, in a report, or on a web page.
To change image resolution or image quality, perform the steps below:
To Next Page
Loading...
