English
-17-
NOTE
y The more the image is enlarged, the more pixilated (grainier) the image.
Self-Timer
The self-timer duration is ten seconds. Activate the self-timer by pressing the shutter button. The
self-timer LED blinks slowly for seven seconds and then blinks rapidly for the last three seconds.
This allows you to get into the scene when taking group images.
1. Secure the camera to a tripod or place it on a stable
surface.
2. Power on the camera. Make sure the camera is in Record
mode.
3. Press the
button.
The icon appears on the LCD monitor.
4. Compose the scene.
5. Press the shutter button.
The self-timer function is activated.
6. After ten seconds, the camera takes an image.
To cancel the self-timer at any time, press the shutter button to disrupt the sequence.
NOTE
y After an image is taken using self-timer, the self-timer mode is turned off.
y If you wish to take another image using the self-timer, repeat these steps.
Flash
The flash is designed to function automatically when lighting
conditions warrant the use of flash. You can take an image
using a flash mode suitable to your circumstances.
If you change the flash mode, the camera will retain that
setting even if the camera is turned off.
To Next Page
Loading...
