Genius P510 - Connecting Camera for PC Use; Running Videoconferencing Software

English
-31-
y The USB driver that bundled inside the CD-ROM is designed in a form 2 in 1 (USB & PC
camera driver).
a) On Windows 98, the Windows OS will install both USB & PC camera drivers.
b) On Windows 2000/ME/XP, it will only install PC camera driver.
Step2: Connecting the Camera to Your Computer
1. Connect one end of the USB cable to an available USB port on your computer.
2. Connect the other end of the USB cable to the USB connector on the camera.
3. The USB MODE menu appears on the screen.
4. Use the
/ button to select PC CAMERA, and press the OK button. PC CAMERA is
displayed on the LCD monitor.
5. Position the camera steadily on top of your computer monitor or use a tripod.
NOTE
y When using this camera as a PC camera, there is no need to install any batteries into the
camera. The camera will automatically power on when connected to the computer via USB
cable.
Step3: Running Your Application Software ( i.e.
Windows NetMeeting)
To use Windows NetMeeting for videoconferencing:
1. Go to Start → Programs → Accessories → Communications → NetMeeting to
launch the NetMeeting program.
2. Click the Start Video button to view live video.
3. Click the Place Call button.
4. Type the e-mail address or the network address of the computer that you are calling.
5. Click Call. The person that you are calling must also have Windows NetMeeting running and
be willing accept your call to start the videoconference.
NOTE