Genius P510 - Normal Mode Photography; Digital Zoom Functionality

English
-16-
NOTE
y The flash mode is disabled in the portrait mode.
Normal Mode
The normal mode, suitable for scenery shooting, is used when the distance to the subject is
greater than 1.4 meters.
1. Power on the camera. Make sure the camera is in Record
mode.
2. Set the focus dial located on the front side of the camera to
the
position.
3. Compose your scene.
4. Press the shutter button.
Digital Zoom
Using digital zoom, images appear closer. Whereas digital zoom is a compelling feature, the
more an image is enlarged (zoomed), the more pixilated (grainier) the image will appear.
1. Power on the camera. Make sure the camera is in
Record
mode.
2. Press the OK button to activate the digital zoom
function.
The zoom bar and magnifier icon appear on the
LCD monitor.
Press the button to magnify up to 4X.
Press the button to reduce the magnification
level.
3. Press the OK button to cancel the digital zoom function.
4. Press the shutter button to capture a "zoomed" image.