The Timer feature (B) is a count-down timer that will turn the system off after a predetermined period of time, which
depends on the status of your GenZe 2.0. The following conditions will trigger a Timer shutdown (listed in order of
priority):
1. If the battery key lock is unlocked at startup, the GenZe 2.0 will timeout after 30 seconds.
2. If the Pin Code is not entered after power-up, the GenZe 2.0 will timeout after 2 minutes.
3. If the Run/Stop Switch is left in Stop, the GenZe 2.0 will timeout after 5 minutes.
The Run/Stop Switch, battery lock, and kickstand (A) each have two indicator lights. In order for you to operate your
GenZe 2.0, all indicators must be green. When the Run/Stop Switch is in the stop (off) position, its indicator is red. If
the battery lock is in the unlocked position, the indicator is red. If the kickstand is down, its indicator is yellow.
The gear indicator (C) will display the current gear position as selected the forward/reverse switch. There are 3
indicated positions “F” forward, “N” neutral, and “R” reverse.
To Next Page
Loading...