This is a two-position lock that is located on the
right side of the GenZe 2.0 next to the battery pack.
When in the locked position (A), this will prevent
theft of the battery pack via a locking deadbolt and
will provide input to the controller in order to
power the system. When in the unlocked position
(B), the battery pack can be removed for external
charging. If the GenZe 2.0 is turned ON with the
key unlocked, it will shut down within 30 seconds.
If the pin code is entered before the 30 second
timeout, the GenZe 2.0 will immediately power
down. The key is removable in both positions.
NOTE: If the Key Lock is unlocked after
the GenZe 2.0 is turned ON, the vehicle
will immediately shut down. The GenZe
2.0 should be shut down using Run/Stop
Switch before unlocking battery.
The push button start switch (silver) will turn on
the GenZe 2.0. It is located on the right side, below
the handlebar. Before it will turn ON, the following
steps should be performed.
• Run/Stop Switch is in the ON position.
• Battery pack key lock is in the locked position
(see Battery Pack Key Lock description).
Back to Top
Cruise Connect Touch Screen Overview
NEVER attempt to adjust or press the touch screen while the GenZe 2.0 is in motion.
ALWAYS keep both hands on the handlebar any time the GenZe 2.0 is in motion.
Home Screen
To Next Page
Loading...