4. Once your new PIN has been validated, the screen will return to the Main Screen.
!
Back to Top
Starting and Operating
Pre-Ride Inspection
Make sure safety is your first priority by ensuring that your GenZe 2.0 is in good working order. Visual and
mechanical checks will be outlined and should always be performed prior to operating. If damaged or worn parts
are found during your inspection, do not operate your GenZe 2.0 until the problem has been addressed.
• Brakes. Squeeze the brake levers individually while pushing the GenZe 2.0 to see if it rolls. You should be able
to lock-up the wheels completely by applying the brakes.
• Throttle. With the Run/Stop Switch in the OFF position, fully twist the throttle and release to verify that the
throttle is smooth and returns correctly.
• Tires. Check both tires for condition and tread depth. Check tire pressure frequently. Maintain correct tire
pressure as specified in this manual. See “
Tire Inflation
”. Replace the tires when the tread height is 0.08 in
(2 mm) or less.
Back to Top
Under-inflation is a common cause of tire failure and may result in severe tire cracking, tread separation,
“blowout,” or unexpected loss of control causing serious injury or death. Inspect tires regularly to ensure proper
inflation levels.
To Next Page
Loading...