RCLFROG:
Display the time with the ignition off by
pressing this button. When the radio
is
playing, press
this button
to
recall the station frequency.
Finding
a
Station
AM-FM:
Press this button to switch between AM, FMl
and FM2. The display shows your selection.
TUNE:
Press the right or left arrow to go to
a
higher or
lower station. Press and hold to continue tuning and
release when you find your station. The display will
show the frequency of each station tuned.
SEEK:
Press the right or left arrow to go to the
next
higher or lower station and stay there.
PUSHBUTTONS:
The six numbered pushbuttons let you
return to your previously played stations.
You
can set up to
18
stations
(six
AM, six
FM1
and six
FM2).
Just:
1.
Turn the radio on.
2. Press AM-FM to select the band.
3.
Tune in the desired station.
4.
Press one of the six pushbuttons for at least
two seconds. The sound
will
mute and then return
when
the station is stored. Whenever you press that
numbered button, the station you
set
will return.
5.
Repeat the steps
for
each pushbutton.
PRESET
SCAN:
Press this button to hear each
of
your
favorite stations stored on your pushbuttons for
a
few
seconds. When you want to stop at
a
chosen station.
press PRESET
SCAN
again.
Setting the Tone
BASS:
Turn the control behind
the
TREB knob
clockwise to increase bass. Turn it counterclockwise to
decrease bass.
TREB:
Turn this knob clockwise to increase treble.
Turn
it
counterclockwise to decrease treble.
If
a
station
is weak or noisy, you may want to decrease the treble.
Treble and bass cannot be adjusted manually when
TONE SELECT
is
on.
TONE
SELECT
Press this button to choose preset bass
and treble equalization settings designed for ROCK,
NEWS, POP, JAZZ and CLASSICAL. ROCK will
appear when you first press TONE SELECT. Each time
you
press
it,
another setting will appear on the display.
If
you press
it
one more
time,
after CLASSICAL appears
on the display, tone control will be back to
the
BASS
and
TREB knob.
3-9
I
To Next Page
Loading...
