Adjusting the Speakers
BAL:
Turn ths control behind the
FADE
knob to move
the sound between the right and
left
speakers. The middle
position balances the sound between the speakers.
FADE:
Turn this knob to move the sound between the
front and rear speakers. The middle position balances
the sound between the speakers.
Playing
a
Cassette Tape
Your tape player is built to work best with tapes that are
30
to
45
minutes long on each side. Tapes longer than
that are
so
thin they may not work well in this player.
The longer side with the tape visible should face
to
the
right. If you hear nothing or hear just a garbled sound, it
may not be in squarely. Press STOP or EJECT to
remove the tape and start over.
Once the tape is playing, use the knobs for VOL, FADE,
TREB, BASS and BAL just as you do for the radio. The
lighted arrows show which side
of
the tape is playing.
REW
(1):
Press this button to reverse the tape rapidly.
Press REW, RCL or STOP to return to playing speed.
RPT
(2):
Press this button to
go
to the beginning of the
selection and play it again. Press RPT again
to
cancel
this
function.
FF
(3):
Press this button to advance quickly to another
part
of
the tape. Press
FF,
RCL or
STOP
to return to
playing speed.
PRV
(4):
Press this button to search for the previous
selection on the tape. Your tape must have at least three
or four seconds of silence between each selection for
PREV to work. Press NXT again
or
press RCL, or
STOP to cancel this function.
RDM
(5):
When playing a tape, press this button during
FF
or REW to hear the radio. Press
it
again to
turn
the
radio
off.
During this operation, only TUNE, SEEK and
PSCAN will work.
NXT
(6):
Press this button to search for the next
selection
on
the tape. Your tape must have at least three
or four seconds of silence between each selection for
NXT to work. Press NXT again or press RCL, or STOP
to cancel this function.
00:
Press
this
button to reduce background noise from
tapes encoded with Dolby NR.
Dolby@ Noise Reduction is manufactured under a
license from Dolby Laboratories Licensing Corporation.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
3-13
I
To Next Page
Loading...
Need help?
General
