Geo Trio II Touch Button - Display Configuration; Sound and Alert Preferences

22
Trio II | User Manual
Display
Use this screen to change the display
settings for your monitor.
Brightness
Set the brightness of the screen.
This aects all screens as well as the
intensity of the LED.
Backlight
When set to ON, the monitor screen will
be on at all times (unless backlight timer
is on). When OFF, press any button to
wake after ve minutes of inactivity.
Backlight timer
When set to ON, the screen will be on
between the times selected.
When o, press any button to wake.
Sound & Alerts
Change the volume of warning tones
and when you hear them.
Volume
This sets the volume of all sounds.
Alerts
Set to ON if you wish to receive
audible notications of new alerts.
Examples of alerts include battery low,
loss of meter network, or WiFi network
(if the WiFi module is connected).
Alerts will wake your screen even if
your backlight is set to o.
Message alerts
Set to ON if you wish to receive
audible notication for new messages.