8
Trio II | User Manual
Getting Started
Meter Connection
The screen will show Connecting to
smart meter... for up to ve minutes
while the monitor connects to the
smart meter(s) in your home.
If the screen show No Network then
you will need to contact your energy
provider to complete the installation.
If the screen shows Lost Network,
then you may need to move the
monitor closer to your smart meter(s)
to re-establish the connection.
You can check the strength of the
signal to the smart meter(s) by looking
at the l and m icons in the top left
hand corner of the screen.
Connection Established
Once your monitor has successfully
established a connection to your
smart meter(s), your Trio II will
show the current consumption for
electricity, recent gas usage and the
house temperature.
If your monitor loses connection to the
smart meter(s), then it will show the
following alert:
Try moving the Trio II closer to the
smart meter(s) to re-connect.
To Next Page
Loading...
Need help?
General
