Getting Started
27
2
2.3 Configuring the Basics
Once you have installed and logged in the GV-IP Speed Dome, you are ready to configure
some of its primary settings through the Web interface:
• Date and time adjustment: see 5.8.1 Date & Time Settings.
• Login and privileged passwords: see 5.8.4 User Account.
• Network gateway: see 5.7 Network.
• Camera image adjustment: see 3.2 The Control Panel of the Live View Window.
• Video format, signal format, resolution and frame rate: see 5.1.1 Video Settings.
IMPORTANT: If you are using a 50 Hz flicker, set the Flicker Hz value to 50 Hz. See Video
Signal Type in 5.1.1 Video Settings.
To Next Page
Loading...
Need help?
General
