Guest Mode & Live View Panel
37
3
3.8 Remote Configuration
You can upgrade the device firmware over the network. Click the Show System Menu button
(No. 12, Figure 3-2), and select Remote Config. The Remote Config dialog box will appear.
[Firmware Upgrade] In this tab, you can upgrade the firmware over the network. For details,
see Chapter 6 Advanced Applications.
3.9 Camera Name Display
To display the camera name on the image, click the Show System Menu button (No. 12,
Figure 3-2), and select Show Camera Name.
3.10 Image Enhancement
To enhance the image quality of live video, click the Show System Menu button (No. 12,
Figure 3-2), and select Image Enhance. This dialog box appears.
Figure 3-10
De-Interlace: Coverts the interlaced video into non-interlaced video.
De-Block: Removes the block-like artifacts from low-quality and highly compressed video.
Enable DirectDraw: Activates the DirectDraw function.
To Next Page
Loading...
Need help?
General
