Need help?Do you have a question about the Gerber XLp and is the answer not in the manual?
Visual guide for unboxing, crate removal, and plotter assembly steps.
Recommended sequence for installing WinPlot first, then the XLp update.
Procedures for calibrating cartridge alignment including XGap, Overlap, and Separation.
Detailed steps for performing and adjusting X-axis gap calibration.
Procedure for adjusting cartridge overlap, noting it is not available on XLp50.
Steps to perform Y-head calibration for proper cartridge separation.
Guide for performing Y-gap calibration for forward and reverse movement.
Visual guide for unboxing, crate removal, and plotter assembly steps.
Recommended sequence for installing WinPlot first, then the XLp update.
Procedures for calibrating cartridge alignment including XGap, Overlap, and Separation.
Detailed steps for performing and adjusting X-axis gap calibration.
Procedure for adjusting cartridge overlap, noting it is not available on XLp50.
Steps to perform Y-head calibration for proper cartridge separation.
Guide for performing Y-gap calibration for forward and reverse movement.
To Next Page
General