Gesipa FireFox - Environmental Notes; Warranty Information; EC Declaration of Conformity

20
Cause
- Setting stroke “Y“ too short
- Setting force too small
- Air pressure too small
Set nut is loose
Remedy
- Increase setting stroke (See item 4.1)
- Increase setting force (See item 4.2)
- Increase air pressure to 5-7 bar
8. Notes on environment
Dispose of hydraulic waste oil according to current environmental regulations.
Observe regulations about dangerous substances!
9. Warranty
Our Blind rivet nut gun is covered by a
24-months guarantee from the date of delive-
ry. (Proof by invoice or delivery note)
Damages resulting from natural wear and
tear, overloading or inexpert handling will be
excluded from the guarantee. Damages resul-
ting from material or manufacturing faults will
be removed free of charge by replacement or
offering repair. Claims can only be accepted
if the Blind rivet nut gun is returned in origi-
nal tamper free condition to the supplier or
GESIPA
®
.
10. Declaration of Conformity EC
We hereby declare under our sole responsibility that the products conform to the following
standards and guidelines: a. 2006/42/EG
Cause
- Thread of nut deformed
- Removal period too short
- Nut not automatically
- Setting stroke or setting force not reached
- Nut stuck on threaded mandrel
Nut is not removed by turning
Remedy
- Setting stroke or setting force too great
> Reduce
- Press activation button longer
- Keep holding down activation button until re-
moved nut has been removed by turning
- Refill hydraulic oil
- Remove by pressing the removal button 7 or
unscrew with the help of a hexagon screw
driver (See item 5.3)
ppa. Matthias Rink
Hans-Ulrich Harder