Gesipa FireFox2 - Notes on Environment; Warranty; Declaration of Conformity EC

20
Cause
-Settingstroke“Y“tooshort
- Setting force too small
- Air pressure too small
Set nut is loose
Remedy
- Increase setting stroke (See item 4.1)
- Increase setting force (See item 4.2)
- Increase air pressure to 5-7 bar
8. Notes on environment
Dispose of hydraulic waste oil according to current environmental regulations.
Observe regulations about dangerous substances!
9. Warranty
Our Blind rivet nut gun is covered by a
24-months guarantee from the date of delivery.
(Proof by invoice or delivery note)
Damages resulting from natural wear and tear,
overloading or inexpert handling will be ex-
cluded from the guarantee. Damages resulting
from material or manufacturing faults will be
removed free of charge by replacement or of-
fering repair. Claims can only be accepted if
the Blind rivet nut gun is returned in original
tamper free condition to the supplier or
GESIPA
®
.
10. Declaration of Conformity EC
We hereby declare under our sole responsibility that the products conform to the following stan-
dards and guidelines: a. 2006/42/EG
Cause
- Thread of nut deformed
- Removal period too short
- Nut not automatically
- Setting stroke or setting force not reached
- Nut stuck on threaded mandrel
Nut is not removed by turning
Remedy
- Setting stroke or setting force too great
> Reduce
- Press activation button longer
- Keep holding down activation button until re-
moved nut has been removed by turning
- Refill hydraulic oil
- Remove by pressing the removal button 7 or
unscrew with the help of a hexagon screw
driver (See item 5.3)
Dr. Richard Gärtner
Hans-Ulrich Harder
41303013_Gesipa_FireFox2_160413.indd 20 16.04.2013 13:39:32