Gesipa taurus 3 - Table of Contents

15
GB
Table of Contents
1. Use for intended purpose ..............................................................................16
2. Safety information ..........................................................................................16
3. Working range ................................................................................................16
4. Technical data .................................................................................................17
5. Equipment/accessories .................................................................................17
6. Nosepiece assignment ...................................................................................18
7. Start-up ............................................................................................................19
7.1 To attach spent mandrel container .............................................................19
7.2 Selecting and changing the nosepiece ....................................................... 19
7.3 To set a blind rivet ......................................................................................19
7.4 To suck in and hold a blind rivet .................................................................19
7.5 To empty the spent mandrel container .......................................................20
8. Maintenance and care ....................................................................................20
8.1 To oil jaws ...................................................................................................20
8.2 To change jaws ........................................................................................... 20
8.3 To top up hydraulic oil ................................................................................. 20
8.4 Storage .......................................................................................................21
9. Repairs ............................................................................................................21
10. Troubleshooting .............................................................................................21
10.1 Blind rivet is not set ...............................................................................21
10.2 Spent mandrel is not evacuated ...........................................................22
11. Warranty ..........................................................................................................22
12. CE Declaration of conformity ........................................................................22