Gesipa taurus 3 - Nosepiece assignment

18
GB
BULB-TITE
®
Ø (mm) Rivet material Nosepiece Part No.
4 Al/Al 17/26 BT* 143 4985
5.2 Al/Al 17/32 BT* 143 4986
6.3
Al/Al, steel/steel, Monel/
stainless steel
17/42 BT* 143 4988
7.7 Al/Al 17/48 BT* 143 4989
MEGA-GRIP
®
Ø (mm) Rivet material Nosepiece Part No.
4.8 Al/Al, steel/steel, stainless steel 17/31 MG* 143 4993
6.4 Al/Al, steel/steel, stainless steel 17/41 MG* 143 4865
* available as optional accessory.
Extended version of nosepiece and other special versions are available on request.
4
PG steel/steel, stainless steel, PG stainless
steel, G-Bulb stainless steel, G-Bulb Al/steel
17/29 143 4974
4.8 and 5 Al, CAP
®
Al, CAP
®
Cu, PG Al 17/29 143 4974
4.8 and 5 Steel, Al/Al 17/32 143 4975
4.8 and 5
Stainless steel, Stinox, PG steel, PG stainless
steel, G-Bulb
17/36 143 4977
6 Al 17/36 143 4977
6 Steel 17/40 143 4999
6.4 Al 17/40 143 4999
6.4 Steel, PG steel, Al/Al, stainless steel, G-Bulb 17/45 143 4860
8 Al 17/45 143 4860
Rivet Ø (mm) Rivet material Nosepiece Part No.
2.4 Al/steel, Al/stainless steel 17/18 143 4976
3.0
Steel/steel; stainless steel, Al/steel, Al/stainless
steel
17/20 143 4994
3.2
CAP
®
Al, CAP
®
Cu, PG Al/steel, PG Cu/stainless
steel, PG Al/stainless steel
17/20 143 4994
3.2 Al/steel, steel/steel, stainless steel 17/22 143 5018
4
Al/steel, Al/stainless steel, CAP
®
Al/steel, CAP
®
Al/stainless steel
17/24 143 4955
4 Steel/steel, PG Al/steel, PG Al/stainless steel 17/27 143 4973
6. Nosepiece assignment