44
Using the NFC/RFID Reader
(Optional)
The NFC/RFID reader can read data from NFC (Near Field Communication) and
RFID (Radio Frequency Identification) tags. It supports ISO 14443 A/B, MIFARE,
ISO 15693, and ISO 18000-3 standards.
The NFC/RFID reader is enabled by default. To enable or disable the reader,
run the BIOS Setup program and select Advanced Device Configuration
RFID Card Reader. (See Chapter 6 for information on BIOS Setup.)
For optimal results when reading an NFC/RFID tag, have the tag face the
antenna in the same orientation as indicated by the icon on the exterior of
the Tablet PC.
NOTE:
When not using an NFC/RFID card, do not leave it within or near the
antenna area.
For enhanced applications and customization of the module, contact
your authorized Getac dealer.
The NFC reader requires specialized applications. For further
information, ask your system administrator.
The tablet models with this option do not comply with ENERGY STAR
®
.