Getac F110 User Manual

51
technology for increasing the security of application code. It is used by
application developers.
 Device Configuration enables or disables several hardware components.
The items available for setting depend on your model.
 Diagnostics and System Tester
H2ODST Tool performs system baseline check.
 Recovery Partition allows you to restore your Windows 10 system to the
factory default state by using the “recovery partition” feature. Recovery
partition is a portion of your hard disk drive that is set aside by the
manufacturer to hold the original image of your system.
WARNING:
 Using this feature will reinstall Windows to your system and configure it
to the system’s factory default settings. All data on the hard disk drive
will be lost.
 Make sure that power is not interrupted during the recovery process. An
unsuccessful recovery may result in Windows startup problems.
 Windows RE launches Windows Recovery Environment. Windows RE
(Windows Recovery Environment) is a recovery environment that
provides recovery, repair, and troubleshooting tools in Windows 10.
Security Menu
The Security menu contains the security settings, which safeguard your
system against unauthorized use.
NOTE:
 You can set the user password only when the supervisor password has
been set.
 If both the supervisor and user passwords are set, you can enter any of
them for starting up the system and/or entering BIOS Setup. However,
the user password only allows you to view/change the settings of certain
items.
 A password setting is applied right after it is confirmed. To cancel a
password, leave the password empty by pressing the
Enter key.

Getac F110 Specifications

General

LED backlight	Yes
Display diagonal	11.6 \
Touch technology	Multi-touch
Display brightness	800 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Position location	-
Bus type	DMI2
Stepping	D0
Tjunction	100 °C
Processor code	SR1ED
Processor cache	3 MB
Processor cores	2
Processor model	i5-4300U
System bus rate	5 GT/s
Processor family	Intel® Core™ i5
Processor series	Intel Core i5-4300 Mobile series
Processor threads	4
Processor codename	Haswell
Processor frequency	1.9 GHz
Processor cache type	Smart Cache
Processor lithography	22 nm
Processor manufacturer	Intel
Processor package size	40 x 24 x 1.5 mm
Processor front side bus	- MHz
Processor boost frequency	2.9 GHz
Processor operating modes	64-bit
PCI Express configurations	4x1, 2x4
Supported instruction sets	AVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)	15 W
Internal memory	4 GB
Internal memory type	DDR4-SDRAM
Maximum internal memory	16 GB
Storage media	SSD
Internal storage capacity	128 GB
Graphics card	HD Graphics 4400
Rear camera resolution (numeric)	- MP
Bluetooth version	4.2
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Battery capacity	2160 mAh
Battery life (max)	12 h
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
AC adapter power	65 W
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
Storage temperature (T-T)	-40 - 71 °C
Operating temperature (T-T)	-21 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Device type	Mobile tablet
Form factor	Slate
Product color	Black
Protection features	Shock resistant, Vibration proof
International Protection (IP) code	IP65
Cable lock slot type	Kensington
Keyboard included	No
Processor ARK ID	76308
Processor socket	BGA 1168
Intel TSX-NI version	0.00
Intel ME Firmware Version	9.5
Intel Identity Protection Technology version	1.00

Weight and Dimensions

Depth	207 mm
Width	314 mm
Height	24.5 mm
Weight	- g