Getac F110 User Manual

52
 Set Supervisor/User Password sets the supervisor/user password. You
can set the supervisor/user password to be required for starting up the
system and/or entering BIOS Setup.
 Strong Password enables or disables strong password. When enabled,
the password you set must contain at least one upper-case letter, one
lower-case letter, and one digit.
 Password Configuration sets the minimum password length. Enter the
number in the input field and select [Yes]. The number should be
between 4 and 64.
 Password on Boot allows you to enable or disable the entering of
password for booting up your system.
 Secure Boot Configuration You can access this item only after setting
the Supervisor Password.
Secure Boot enables or disables Secure Boot. Secure Boot is a feature
that helps prevent unauthorized firmware, operating systems, or UEFI
drivers from running at boot time.
Delete all Security Boot Keys deletes all secure boot variables.
Restore Factory Defaults resets secure boot variables to manufacturing
defaults.
 Set HDD 0 User Password sets the password for locking the Primary
Master hard disk drive. After setting a password, the hard disk drive can
only be unlocked by the password no matter where it is installed.
 Security Freeze Lock enables or disables the “Security Freeze Lock”
function. This function is only applicable to SATA drives in AHCI mode. It
prevents attacks on the SATA drive by freezing the security state of the
drive at POST and also when the system resumes from S3.
 TPM Setup Menu
TPM Support enables or disables TPM (Trusted Platform Module) support.
TPM (Trusted Platform Module) is a component on your computer’s
mainboard that is specifically designed to enhance platform security by
providing a protected space for key operations and other security critical
tasks.
Change TPM Status allows you to select between No Operation and
Clear.
 Intel Trusted Execution Technology enables utilization of additional
hardware capabilities provided by Intel® Trusted Execution Technology.

Getac F110 Specifications

General

LED backlight	Yes
Display diagonal	11.6 \
Touch technology	Multi-touch
Display brightness	800 cd/m²
Display resolution	1366 x 768 pixels
Native aspect ratio	16:9
Position location	-
Bus type	DMI2
Stepping	D0
Tjunction	100 °C
Processor code	SR1ED
Processor cache	3 MB
Processor cores	2
Processor model	i5-4300U
System bus rate	5 GT/s
Processor family	Intel® Core™ i5
Processor series	Intel Core i5-4300 Mobile series
Processor threads	4
Processor codename	Haswell
Processor frequency	1.9 GHz
Processor cache type	Smart Cache
Processor lithography	22 nm
Processor manufacturer	Intel
Processor package size	40 x 24 x 1.5 mm
Processor front side bus	- MHz
Processor boost frequency	2.9 GHz
Processor operating modes	64-bit
PCI Express configurations	4x1, 2x4
Supported instruction sets	AVX 2.0, SSE4.1, SSE4.2
Thermal Design Power (TDP)	15 W
Internal memory	4 GB
Internal memory type	DDR4-SDRAM
Maximum internal memory	16 GB
Storage media	SSD
Internal storage capacity	128 GB
Graphics card	HD Graphics 4400
Rear camera resolution (numeric)	- MP
Bluetooth version	4.2
Top Wi-Fi standard	Wi-Fi 5 (802.11ac)
Battery capacity	2160 mAh
Battery life (max)	12 h
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
AC adapter power	65 W
AC adapter frequency	50 - 60 Hz
AC adapter input voltage	100 - 240 V
Storage temperature (T-T)	-40 - 71 °C
Operating temperature (T-T)	-21 - 60 °C
Operating relative humidity (H-H)	0 - 95 %
Device type	Mobile tablet
Form factor	Slate
Product color	Black
Protection features	Shock resistant, Vibration proof
International Protection (IP) code	IP65
Cable lock slot type	Kensington
Keyboard included	No
Processor ARK ID	76308
Processor socket	BGA 1168
Intel TSX-NI version	0.00
Intel ME Firmware Version	9.5
Intel Identity Protection Technology version	1.00

Weight and Dimensions

Depth	207 mm
Width	314 mm
Height	24.5 mm
Weight	- g