Getac F110G7 - Using the Tether

6
Using the Tether
A tether is provided for attaching the stylus to your Tablet PC.
1. Thread one of the tether’s loops through the hole of the stylus (

).
Then, insert the other loop through the first loop (

) and pull the
tether tight.
2. Insert the other loop to the tether hole on the Tablet PC (

). Then,
insert the stylus through the loop (

) and pull it tight.
3. When storing the stylus in the holder, note the orientation of the stylus.
There is a protruding part at the end of the stylus. This part should not
point toward the holder.