Getac F110G7 - Boot Menu; Exit Menu

48
 Set SSD 0 User Password sets the password for locking the SSD. After
setting a password, the SSD can only be unlocked by the password no
matter where it is installed.
 Security Freeze Lock enables or disables the “Security Freeze Lock”
function. This function is only applicable to SATA drives in AHCI mode. It
prevents attacks on the SATA drive by freezing the security state of the
drive at POST and also when the system resumes from S3.
 TPM Setup Menu
Change TPM Status allows you to select between No Operation and
Clear.
 Intel Trusted Execution Technology enables utilization of additional
hardware capabilities provided by Intel® Trusted Execution Technology.
Boot Menu
The Boot menu sets the sequence of the devices to be searched for the
operating system.
 Boot Type Order determines the boot order. You can rearrange the
order by dragging the boot device name up or down in the list.
 Each boot device can be individually set to On or Off. If you want to
exclude a boot device from the boot order, set the device to Off.
Exit Menu
The Exit menu displays ways of exiting BIOS Setup Utility. After finishing
with your settings, you must save and exit so that the changes can take
effect.
 Exit Saving Changes saves the changes you have made and exits BIOS
Setup Utility.
 Exit Discarding Changes exits BIOS Setup Utility without saving the
changes you have made.
 Load Setup Defaults loads the factory default values for all the items.
 Discard Changes restores the previous values for all the items.
 Saves Changes saves the changes you have made.