32
Replacing the Battery Pack
CAUTION:
There is danger of explosion if the battery is incorrectly replaced. Replace
the battery only with the Tablet PC manufacturer’s battery packs. Discard
used batteries according to the dealer’s instructions.
Do not attempt to disassemble the battery pack.
A battery pack can get hot due to long working hours. Do not touch a hot
battery pack with bare hands. After removing a battery pack, put it in a
well-ventilated area.
NOTE:
You can hot swap one battery pack while the other one is supplying the
power. The appropriate temperature range for hot swapping the battery
pack is between -21°C (-5.8 °F) and 45 °C (113 °F).
If you have the high-capacity battery model, the battery pack looks different
from the one shown here. The removal/installation method is the same.
To replace the battery pack, follow these steps:
1. Skip this step if you are hot swapping the battery pack.
Turn off the Tablet PC and disconnect the AC adapter. After turning off
the Tablet PC, allow a cool-down time of at least 5 minutes before
removing the battery pack.
2. Locate the battery pack you want to remove.
3. Slide the battery latch toward the right (
) and then upwards (
) to
release the battery pack.
4. Remove the battery pack from its compartment.
To Next Page
Loading...
