Getac T800 - Using the Touchscreen

15
Navigating on the Screen
Navigating on the ScreenNavigating on the Screen
Navigating on the Screen
The screen of your Tablet PC is touch-sensitive. You can control the location of
the cursor/pointer on the screen using the included stylus or your finger to
communicate with the Tablet PC.
CAUTION: Do not use a sharp object such as a ballpoint pen or
pencil on the touchscreen. Doing so may damage the touchscreen
surface. Use the included stylus or your finger.
NOTE: An optical protection film has been attached to the screen
before shipment. The film is a consumable, which will be worn
out by possible scratches. You can purchase a new one when
replacement is required.
Using the Touchscreen
Using the TouchscreenUsing the Touchscreen
Using the Touchscreen
Your Tablet PC has a capacitive touchscreen. This type of touchscreen responds
to objects that have conductive properties, such as fingertips and a capacitive-tipped
stylus.
By default settings, your touchscreen responds best to fingertips. If you prefer using
a capacitive-tipped stylus (such as the one supplied with your model) or if you
are wearing gloves, you should change the touchscreen settings to suit your scenario.
Double-tap Touch Screen Mode on Windows desktop to open the settings menu and
select one of the options (as shown below).
Select this if you are using
a
capacitive
-
tipped
stylus.
Select this if you are wearing gloves (
referring
to warm gloves or work gloves, not
referring
to touchscreen-capable gloves).
This mode works best
with fingertip
s
.