<Doc_USR><Doc_502607400><Rel_A><Lang_GB>
Page 14 of 28
V2027
Daily inspection
Check that no objects have fallen down into the bottom of the washing chamber.
Loose objects may cause blockages and seriously reduce the performance of the
washer disinfector.
Check that the spray arms can rotate freely. Check that the holes in the spray arms
are not blocked. Blocked spray holes may adversely affect the cleaning result.
Check that the goods to be cleaned are retained in the insert.
If the spray arms need cleaning, remove them by unscrewing the central nut. The
arm can then be lifted off and washed clean. Check that the arm can rotate freely
when re-installed.
Remove and clean the strainer in the bottom of the washing chamber. A dirty
coarse strainer may prevent water from circulating and create the conditions for the
growth of bacteria.
The heating coils under the coarse strainer may be hot.
•
•
•
•
•
If necessary for cleaning, open the strainer with the two nuts.
Open the detergent containers and check that they contain detergent/rinse-aid.
Check that the wash trolley docks properly to the water connections.
Check the accessories of the machine visually with regard to their intended use and
function. For example, blocked channels, worn and missing parts that might affect
the performance of the machine.
Check that the spring movement of the docking mechanisms moves easily. Press in
the docking mechanism and release it. It must return to its initial position.
Check the cleaning instructions of the goods manufacturer.
To achieve the intended level of performance and safety, distribute the load evenly
over the washing surface.
Check the cleaning result visually when the process is complete.
The spray arm journal must be checked daily and replaced every ve years.
•
•
•
•
•
•
•
•
•
Spray arm
Coarse strainer
V773
To Next Page
Loading...
