Getinge 86 SERIES - Fault Indication; Alarm and Fault Code Display; Common Handling Alarms

Page 19 of 28
<Doc_USR><Doc_502607400><Rel_A><Lang_GB>
V1363
FAULT INDICATIONS
Red lamp: Alarm indication
P01 OP-SHORT-D
DOSE 1 LOW LEVEL
Handling alarm or fault code
Handling alarms
Handling alarms appear on the display in plain text.
DOSE 1 LOW LEVEL
The machine cannot be started until the fault has been put right.
The following handling alarms can be displayed:
DOSE 1 LOW LEVEL Empty container alarm 1. If detergent 1 is finished, a handling alarm is generated
The alarm is reset automatically when detergent is added.
DOSE 2 LOW LEVEL Empty container alarm 2. If detergent 2 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
DOSE 3 LOW LEVEL Empty container alarm 3. If detergent 3 is finished, a handling alarm is generated,
The alarm is reset automatically when detergent is added.
DOSE 4 LOW LEVEL Empty container alarm 4. If detergent 4 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
Note:
When the handling alarm is activated (appears on the display) there is always enough deter-
gent left for one run; in other words, if you have started a program it can run to the end.