Getinge 86 SERIES User Manual

Page 7 of 28
<Doc_USR><Doc_502607400><Rel_A><Lang_GB>
Control system
The machine has an electronic controller which can hold up to 10-15 programs. Six of
these programs can be chosen with the program selection buttons. Other programs are
chosen with the menu buttons; see Operating instructions.
The machine comes with a number of standard programs in the control system (see the
separate program sheet). Contact the your reseller for customized programs.
Programming may only be done by authorized personnel.
Door function
The machine can be tted with a single door or double doors. All doors are of the verti-
cal sliding type.
The doors can be motorized for automatic opening and closing. The doors have efcient
anti-crush protection.
Machines with double doors have a system of interlocks to ensure that only one door can
be opened at a time. This means that the clean-side door must be closed and locked by
pressing the W button before the soiled-side door can be opened.
When you press V, the door is locked and a yellow lamp ashes for about 10 seconds.
If V is pressed again during this “cancel time”, the dirty-side door is unlocked and the
door can be opened manually or alternatively it opens automatically.
In standby mode, the door can be opened and closed with U by pressing the button for
10 seconds.
V398
Soiled sideClean side

Getinge 86 SERIES Specifications

General

Brand	Getinge
Model	86 SERIES
Category	Cleaning Equipment
Language	English