Getinge 86 SERIES - Cleaning and Maintenance; Wash Chamber Descaling

Page 15 of 28
<Doc_USR><Doc_502607400><Rel_A><Lang_GB>
If necessary
Washing chamber
Do not allow deposits to form in the wash chamber. Remove any deposits as follows:
Open the door and dispense 200 ml NEODISHER BU descaler (sold by
Dr. Weigert) into the wash chamber.
Close the door and run the descaling program.
NOTE: There must not be any items in the machine with this program. It is only used to
descale the machine and insert.
The outside
The front and side walls can be cleaned and disinfected with an alcohol-based cleaner, medical
spirit or ordinary detergent. The control panel can be cleaned in the same way.
To remove stains, use ordinary stainless steel cleaner.
It is important to maintain a good level of hygiene around the machine.
•
•