Page 21 of 28
<Doc_USR><Doc_502607400><Rel_A><Lang_GB>
F15 Not enough detergent 1 dosed.
F16 Not enough detergent 2 dosed.
F19 Not enough detergent 3 dosed.
F20 Not enough detergent 4 dosed.
F23 High conductivity.
F24 Low pressure in drying unit.
F25 High pressure in drying unit.
F26 Low pressure from circulation pump.
F27 High pressure from circulation pump.
F28 Low temperature in drying unit.
F30 Faulty temperature sensor (controlling) in wash chamber.
F31 Faulty temperature sensor (independent) in wash chamber.
F32 Faulty temperature sensor in drying unit.
F33 Faulty temp sensor in wash chamber. (Temperature too low because
of a heating fault.)
F34 Faulty temp sensor in wash chamber. (sensor fault)
F35 Faulty temperature sensor in booster tank.
F36 Fault message from independent monitoring system; see under
Fault codes in independent monitoring system.
F37 Faulty temp sensor in wash chamber. (Temperature too high be-
cause of a heating fault.)
F38 Disinfection temperature lower than set temperature.
Fault code Description
To Next Page
Loading...
Need help?
General
