<Doc_USR><Doc_502404300><Rel_A><Lang_GB>
Page 18 of 24
V1363
FAULT INDICATIONS
Red lamp:
Alarm indication
P01 OP-SHORT-D
DOSE 1 LOW LEVEL
Handling alarm
or fault code
Handling alarms
Handling alarms appear on the display in plain text.
DOSE 1 LOW LEVEL
The machine cannot be started until the fault has been put right.
The following handling alarms can be displayed:
DOSE 1 LOW LEVEL Empty container alarm 1, if detergent 1 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
DOSE 2 LOW LEVEL Empty container alarm 2, if detergent 2 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
DOSE 3 LOW LEVEL Empty container alarm 3, if detergent 3 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
DOSE 4 LOW LEVEL Empty container alarm 4, if detergent 4 is finished, a handling alarm is generated.
The alarm is reset automatically when detergent is added.
Note!
When the handling alarm is activated (appears on the display) there is always enough de-
tergent left for one run; in other words, if you have started a program it can run to the end.
Panel, soiled side
Red lamp:
Alarm indi-
cation
Handling alarm
or fault code
P01 OP-SHORT-D
DOSE 1 LOW LEVEL
Panel, clean side
J131
To Next Page
Loading...
Need help?
General
