Slimdrive EMD / -F / -F-IS / Invers
3
Symbols and means of representation
Warnings
In these instructions, warnings are used to warn against material damage and injuries.
X
Always read and observe these warnings.
X
Observe all the measures that are marked with the warning symbol and warning word.
Warning
symbol
Warning word Meaning
CAUTION
Danger for individuals.
Non-compliance can result in minor injuries.
Further symbols and means of representation
Important information and technical notes are especially highlighted to explain correct operation.
Symbol Meaning
means "Important Information";
Information on avoiding material damage, understanding a concept or optimising workows.
means "additional information"
X
Symbol for an action: Here you have to do something.
X
If there are several actions to be taken, keep to the given order.
Revisions and validity
Valid for software version DCU2 V1.0 or higher
Product liability
In accordance with the manufacturer's liability for their products as dened in the German "Produkthaftungs-
gesetz" (Product Liability Act), the information contained in this brochure (product information and proper use,
misuse, product performance, product maintenance, obligations to provide information and instructions) is to be
noted and followed. Failure to comply releases the manufacturer from their statutory liability.
Special cases
In certain cases, such as with
à special wiring
à special function settings (parameters)
à special software
deviations from the information given in this user manual may occur.
X
If this is the case, please ask the service technician responsible.
To Next Page
Loading...
Need help?
General
