Gi Mini - Service Management (Continued); Channel List Editing (Move, Delete); Channel Lock and Find

14
1. Select the channels which you want to edit
in channel list by press [OK] key or other
select mode.
2. Then press [Right] key to move the high
light to right toolbar.
3. Select Move icon by press [Channel
Up/Channel Down] key and [OK] key.
4. Move the channels to the position which
you want and press [OK] key to confirm.
Like the following picture:
Lock
1 Select the channels which you want to edit in
channel list by press [OK] key or other select
mode.
2 Then press [Right] key to move the high light
to right toolbar.
3 Select Lock icon by press [Channel
Up/Channel Down] key and [OK] key.
4 Lock the channel by press [OK] key.
Like the following picture:
Delete
a) Select the channels which you want to
edit in channel list by press [OK] key or
other select mode.
b) Then press [Right] key to move the high
light to right toolbar.
c) Select Delete icon by press [Channel
Up/Channel Down] key and [OK] key.
d) Delete the channel by press [OK] key.
Skip and rename
Follow the same way you can set the channel’s
Skip or give the new name for high light channel.
Find
1. Press[Find] key can open the “Find”
window like above. You can press[Channel
Up/Channel Down/Volume Up/Volume
Down]key to move highlight and press [OK]
key to input the selected symbol or letter
into the dialogue.