FT-M1211A 24
3 SAFETY
3.1 GENERALITIES
It is imperative that the Chapter 1 General Precautions be read and respected.
Emergency Stop of the machine :
- Press the button Emergency Stop :
The machine remains in the position that it was in just prior to the moment it was stopped.
The machine should be put back into operation only by the person in charge by
pushing the reset button and is to do so only after having ensured that there is no longer
any danger.
Resetting the machine is authorized if and only if:
- None of the emergency stop push-buttons are still activated,
- All of the moveable guard contacts are activated,
3.2 STOPPING THE MACHINE
- -Place the main selector into the OFF
position.
padlock not supplied
- Close the air supply valve and padlock it.
To Next Page
Loading...