FT-M1211A 8
Do not try to remedy a jamming of the machine while the machine is running, which
could lead to serious injuries.
Place the main switch to the OFF position before any intervention on the machine.
Do not turn on the machine until the problem has been resolved. Otherwise, damage
to the mechanical .and electrical components could result.
Incorrect settings that provoke jamming will lead to the damaging of the machine.
Jamming which is accompanied by a loud noise or a grinding sound could be caused
by a problem with one or more of the machine’s components.
Stop the machine to prevent further damage and call a qualified person.
Note : The more centered the article is the better the quality of the fold
The Jean Michel Company declines all responsibility for material and or other damages
resulting from the usage of the machine outside of that which it was designed and intended
for or in the case in which the instructions outlined in the technical manuals have not been
followed.
1.3 WARNINGS
Forbidden pictograms (Red and white circle) :
Entering forbidden
Use of forklift forbidden
Do not stay under load
Access forbidden for unauthorized persons
To Next Page
Loading...