Giabau FT-MAXI - 4.2 FUNCTIONING

27 FT-M1211A
4.2 FUNCTIONING
Make sure that nobody puts their hands in the machine.
Verify that all of the protections are in place and that nobody is working on top
of or under the machine
Before starting the machine, check:
- The direction of rotation of the motors,
- The air pressure, which should be 6 bars.
Starting the machine :
- Open the compressed air-supply valve.
- Check the pressure.
- - Put the main switch into the ON position.
Once all of the safety measures have been taken: :
- Push the RESET button
Once all of the defaults have been cleared:
- Push the ON button
Stopping the machine:
- Check that all of the pieces of laundry have been discharged.
- Push the STOP button .