GIGA-BYTE TECHNOLOGY GA-X99-Phoenix SLI User Manual

- 20 -
Hardware Installation
C-2. To Enable SLI Function
After installing the graphics card driver in the operating system, go to
the NVIDIA Control Panel. Browse to the CongureSLI,Surround,
Physx screen and ensure Maximize 3D performance is enabled.
C.ConguringtheGraphicsCardDriver
C-1. To Enable CrossFire Function
After installing the graphics card driver in the operating system, go
to the AMD Catalyst Control Center. Browse to Performance\
AMD CrossFireX™ and ensure the Enable AMD CrossFireX
check box is selected. If your system has more than two CrossFire
cards, select the GPU combination you want to use and click Ap-
ply. (Available combination options are dependent on the number
of graphics cards.)

GIGA-BYTE TECHNOLOGY GA-X99-Phoenix SLI Specifications

General

Brand	GIGA-BYTE TECHNOLOGY
Model	GA-X99-Phoenix SLI
Category	Motherboard
Language	English