Gigabyte GA-X79S-UP5 User's User Manual

Appendix
- 92 -
5-2-2 InstallingtheSASRAIDDriverandOperatingSystem
With the correct BIOS settings, you are ready to install the operating system.
A.InstallingWindows7/Vista
(The following instructions use Windows 7 as the example operating system.)
Step 1:
Boot from the Windows 7/Vista setup disk and perform standard OS installation steps. When you arrive at the
"Where do you want to install Windows?" screen, selectLoad Driver.
Step 2:
Insert the motherboard driver disk and then browse to the location of the driver. The locations of the drivers
are as follows:
for Windows 32-Bit:\BootDrv\iRST\SAS32
for Windows 64-Bit:\BootDrv\iRST\SAS64
Step 3:
For Intel C606, select Intel(R)C600SeriesChipsetSASRAIDController(Figure 1). Click Nextto load the
driver and continue the OS installation.
Figure 1

Gigabyte GA-X79S-UP5 User's Specifications

General

Brand	Gigabyte
Model	GA-X79S-UP5 User's
Category	Motherboard
Language	English