To Next Page

To Previous Page

Appendix

- 98 -

5-3-3 ConguringMicrophoneRecording

Step 2:

Connect your microphone to the Mic in jack (pink) on the

back panel or the Mic in jack (pink) on the front panel.

Then configure the jack for microphone functionality.

Note: The microphone functions on the front panel and

back panel cannot be used at the same time.

Step 3:

Go to the Microphone screen. Do not mute the recording

volume, or you'll not be able to record the sound. To hear

the sound being recorded during the recording process,

do not mute the playback volume. It is recommended that

you set the volumes at a middle level.

Step 1:

After installing the audio driver, the HDAudioManager

icon will appear in the notification area. Double-click

the icon to access the HDAudioManager.

Step 4:

To raise the recording and playback volume for the

microphone, click the MicrophoneBoost icon on

the right of the RecordingVolume slider and set the

Microphone Boost level.

Gigabyte GA-X79S-UP5 User's User Manual

Questions and Answers: