Gigabyte MZ73-LM1 - Page 110

BIOS Setup
- 110 -
Parameter
Description
Data Link Feature Cap
Enable/Disable the data link feature capability.
Options available: Enabled, Disabled, Auto. Default setting is Auto.
CV test
Enable/Disable the running PCIE CV tool support.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
SEV-SNP Support
Enable/Disable the SEV-SNP support.
Options available: Disable, Enable. Default setting is Disable.
Allow Compliance
When enabled, allows the PCIe RP to enter Polling.Compliance state.
Options available: Auto, Disable, Enable. Default setting is Auto.
SRIS Options available: Auto, Disable, Enable. Default setting is Auto.
Multi Upstream Auto
Speed Change
DenesthesettingofthisfeatureforallPCIedevices.
Options available: Disabled, Enabled, Auto. Default setting is Auto.
Multi Auto Speed Change
On Last Rate
Options available: Disable, Enable, Auto. Default setting is Auto.
PCIE Link Speed
Capability
Options available: Maximum speed, Gen1, Gen2, Gen3, Gen4, Gen5, Auto.
Default setting is Auto.
RTM Margining Support Options available: Disable, Enable, Auto. Default setting is Auto.
EQ Bypass To Highest
Rate
Options available: Disable, Enable, Auto. Default setting is Auto.
nBif Common Options Press[Enter]forcongurationofadvanceditems.