31
Gigaset Maxwell basic / LUG IE-UK en / A31088-N4002-R101-3-7619 / settings.fm / 6/9/16
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Basic settings
Resetting the device to the factory settings
A reset returns all the settings to the default settings. Network configuration, VoIP connections,
directories, call lists and all the individual settings are deleted or restored to the factory settings.
¤ . . . use to select Settings OK Reset OK confirm prompt with Yes
Resetting using the device keys
¤ Disconnect the telephone from the mains power supply press the Control key
holding the key down, reconnect the device with the power supply
Displaying device information
The menu entry Info provides information about important settings on the telephone.
¤ . . . use to select Settings OK Info . . . the following information is
displayed:
Safeguarding personnel settings from the reset: p. 38
Resetting the device with the Web configurator p. 39
Device: Telephone product name
SW Version: Version of the firmware currently loaded on the phone.
Country Version: Country-specific version of the product
MAC Address LAN: The phone's device address.
IP Address: The phone's current IP address within the local network. The IP
address is usually set automatically via a DHCP server in the network.
There is more information about the settings and the status of the telephone in the
status display of the Web configurator ( p. 40).
To Next Page
Loading...
