34
Template Go, Version 1, 01.07.2014 / ModuleVersion 1.0
Configuring other settings with the Web configurator
Gigaset Maxwell basic / LUG IE-UK en / A31088-N4002-R101-3-7619 / web_configurator.fm / 6/9/16
Telephony
Changing the standard send connection
If the telephone has more than one VoIP connection, outgoing calls are initiated via the standard
send connection (
p. 11).
Changing the standard send connection:
¤ Settings Telepho ny Connections
All the configured connections are shown. The check box under Default send connec
tion
shows which connection is currently selected.
¤ Check the connection required Set
Only active connections can be selected.
Settings for Call Waiting
Specify the telephone's response when another call comes in during a call.
¤ Settings Telepho ny Call Settings
For each connection:
Prevent/permit Call Waiting:
¤ Select the option under Display waiting call ( = Call Waiting permitted) /
deselect ( = Call Waiting not permitted)
Permit Call Waiting:
¤ Select Acoustic signal from the list
Off: the incoming call is shown in the display only
or signalling with a Call Waiting tone (beep): once or every 4, 10, or 20 seconds
Save the settings: Set
To Next Page
Loading...
