EasyManuals Logo

GILBARCO VEEDER-ROOT Passport MDE-5412 User Manual

Default Icon
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #42 background imageLoading...
Page #42 background image
The steps, found in “Appendix D: Customer Tablet Programming” on page 84 should be
performed on the tablet prior to the installation of that device into the Passport Edge
System. The items in “bold” are the recommend settings but these settings can be
changed due to customer requirements. If Assistance is need during this process, the
customer should contact Apple’s initial setup support center at 1-800-MY-APPLE
(800-692-7753). Note that the only IPad tablet currently support are Apple iPad 9.7 (5th
and 6th Generation) and the iPad Pro 9.7 both equipment with 32GB and Wi-Fi.
IMPORTANT INFORMATION
Page 42 MDE-5412C Passport® EDGE Installation and Start-up Manual · February 2019
Passport Edge Software Setup
Passport Client (Tablet)
To configure and set up the Passport Edge tablets [Cashier Workstation (CWS)], proceed as
follows:
Configuration of the tablet(s) will require that the IP’s schema be setup as part of that
process. Please refer to the IP Schema information located at step 8 on page 45 for the
information needed to accomplish that part of the configuration.
IMPORTANT INFORMATION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GILBARCO VEEDER-ROOT Passport MDE-5412 and is the answer not in the manual?

GILBARCO VEEDER-ROOT Passport MDE-5412 Specifications

General IconGeneral
BrandGILBARCO VEEDER-ROOT
ModelPassport MDE-5412
CategoryWireless Router
LanguageEnglish